17 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
3 CROSSBEAM INSTALLATION
WALL-MOUNTED VERSION
A
B
C
D
E
Z
F
Fig. 16 - Wall-mounted beam assembly
- fix the plate (
A
) with the relevant M8x16 screws (
E
)
- fix the plate (
B
) with the relevant M8x16 screws (
D
)
- fix the plate (
C
) with the relevant M8x16 screws (
F
)
- repeat the same operations on the opposite side.
Note: the beams are already fitted with the brackets fixed by Corradi S.r.l. for a possible side
closure (Z).
Fig. 17 - Wall-mounted beam assembly
Note: before installing the beams to the wall, install profile (A)
- Fix profile (
A
) with the suitable short self-drilling screws (
B
) at a distance of approximately 50 cm
one from the other (
det. X
).
ATTENTION: If side closures are foreseen to be installed on the lateral sides
it will be necessary to cut the profile as indicated in det. Y. Repeat the operation on
the opposite side if the side closure is foreseen.
Det. X
Cutting line
Configuration
without side
closure
Configuration
w i t h s i d e
closure
Det. Y
A
B
