37 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
Fig. 45
- Position the gutter at the centre of the terminal tube ensuring that the gutter does not scrape;
- first drill the gutter two ends, then its central part at steps of approximately 50 cm, in the suitable
groove and the terminal tube with a ø4 bit.
Fig. 46
- Use the suitable rivets to fit the gutter in the previously drilled points;
- repeat these operations (symmetrically) on the structure opposite side.
10 MOBILE GUTTER