25 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
3 CROSSBEAM INSTALLATION
Fig. 27 - Motor bearing crossbeam
- Fit the fourth crossbeam (motor crossbeam) (
A
) with the same method used before.
Note: Insert the motor cable coming out of the beam inside the pillar through hole (B).
We recommend that pillar to be the one with the power supply for the structure.
Fig. 28
- From the accessories box, take the 16 M8x16 BUTTON screws needed to fix the beam and the pillar;
- insert the 4 screws (
A
) through the inspection hole on each pillar without fully tightening them
(leave a few millimetres) to allow the following installation of the perimeter gutters.
A
A
B
A
A
