Figure 34: Setting the camera properties 2
)
Note: If your Convision V6xx A is connected via ISDN it is advisable to reduce the
quality and thus the data volume of the images to achieve a smooth image stream.
)
Note: The hue (for NTSC cameras only) defines the color hue of the image and is
set to 128 by default. If the image does not exhibit a natural hue with this setting, you
can adapt it by slightly changing the default value.
9.3 Events – Actions When an Alarm Is Triggered
An event occurs either when an input is activated (time-dependent by timers you
configured), when an internal event occurs or when a camera detects and reports an
activity.
These menu items are used to configure the events. You then assign actions to the
events that are to be triggered as a response. The following actions may be possible:
♦
CameraPresets (at least one controllable camera must be connected)
Activate the preset positions that are to be taken. These
positions will be taken directly one after the other in the order
listed.
♦
Hard disk
(Convision V610 A only)activate the checkboxes of the
partitions you want to record to.
♦
Frame Buffer
Activate the checkboxes of the frame buffers that are to be filled
but not sent. If you want to append frame buffers to an e-mail or
VdS notification, you must
not
enter them here.
♦
Camera Tour
(at least one controllable camera must be connected) Here you
can start or stop the camera tour that was previously configured
under either Camera/Live Optimized or Live Compatible.
♦
Output
(Time) – Activate the checkboxes of the outputs that are to be
switched for the time period set.
- 56 -
Convision V600 A Series
