9.2 Camera
Settings
In the "Configuration/Cameras" menu you can rename the connected cameras, i.e.
assign them individual names (e.g. depending on the position of the camera). In
addition, you can set the camera properties.
9.2.1 General – Settings for the Image Display
Figure 32: Gerneral camera settings
♦
Per default the video norm is PAL. If the cameras do not correspond to the
selected norm the camera images will be shown distorted.
-
Select „NTSC“, if your cameras correspond to the NTSC norm.
-
Save the data.
-
You will be prompted to reboot the device. For this purpose, click the "Reboot"
button.
♦
Activate the checkbox if the camera images are to be saved in the "hard disk
cache" of the browser (not in Internet Explorer).
activated: The individual image displayed in the browser window can be
saved.
not activated: When saving an image, an up-to-date image from the
camera is used instead of the one displayed in the browser.
♦
Activate this checkbox to enable the display of date/time in the Java applet.
)
Note: The Java applet also has a pop-up menu (click the right mouse button on
the image) via which the date can be shown/hidden.
9.2.2 Name – Renaming Cameras
In this menu you can assign each camera a name. It is a good idea to use the name
of the location at which the respective camera is mounted. After entering the names,
click the "Save" button to save the names you assigned in the Convision V6xx A. The
names assigned to the cameras will then be displayed in the camera views.
- 54 -
Convision V600 A Series
