3. Click the diskette icon. A dialog box for saving the current image section related
to a position number is displayed.
4. Click the desired position and assign it a name.
5. Save the data. The dialog box is closed.
Now you can always focus on that point by clicking the respective position number.
The names will be displayed as a tool tip whenever the mouse cursor is positioned
on the number. The preset sections can also be addressed due to an event (refer to
Chapter 9.3).
Preset Tour
1. Configure the desired presets.
2. Click on the icon
. This opens a dialogue box.
3. Click on the desired number position and input the desired amount of time.
4. Save the data.
5. Start the “Tour“ by clicking on start. The black indicator and the ”Tour“ icon will
change to red.
6. End the “Tour“ by clicking on “stop“. The red indicator and the “Tour” icon will
change to black.
)
Note: If the configuration protection function is activated, administrator rights are
required for the storage process.
8.1.2 Sequencer
The sequencer allows you to program the cameras to be viewed sequentially for a
specified time, without having to manually shift between the cameras.
Configuration
♦
Click the activation box before each camera you want to view.
♦
Input the time in seconds you want to view the camera for.
♦
Save the data.
You can also set the sequencing configuration in the
“Configuration/Camera/Sequencer“ menu.
Start
sequencer
♦
Click on either Live-optimised or Live-compatible. You will see the images,
depending on your browser configuration, either in Live-optimised or Live-
compatible mode.
Stop
sequencer
♦
Click on “Save“ in the configuration menu
- 26 -
Convision V600 A Series
