Configuration“). (For more information about IP addresses and network masks refer
to Chapter 10.8)
Configuration of a Port Number
The default ports for the IP video server are 80 (HTTP) and 21 (FTP). You do not
need to specify these ports. If you require another port, click on “Port“ and replace
the default settings with your own data. Save the data and reboot the video server.
Access: Write the IP address with a colon and the new port number in the address
line of the browser.
http://192.168.0.111:8050
Only change this port if you have sufficient TCP/IP knowledge.
The Router Entry:
If you are using a default router in your network to connect to the Internet, enter its IP
address in the "Router" field. All the IP addresses outside the LAN will then be
accessed via this router.
The DNS-server entry:
In this field you have to enter the IP address of a DNS (Domain Name Service)
server (a DNS server converts an alphanumeric address to an IP address). In this
case, you should select the DNS server of the provider set in the Convision V6xx A.
For information on this topic, please revert to your provider.
Syslog Server
If you are operating a syslog server in your network, the Convision V6xx A can send
messages/error messages to the IP address of this syslog server. If your network
does not include a syslog server, this field should remain empty.
The default port for a syslog server is 514. If you have set up your syslog server on
another port, you can change this in the “Port” section.
)
Note: It makes sense to specify a syslog server only if it can be accessed via the
Ethernet.
Mail Server
The mail server must be specified if you are intending to send e-mails or SMS via the
LAN connection to the Internet. If you want to send mail via an ISDN connection, you
have to enter the respective data via the ISDN/Modem item.
Manual
- 35 -
