8.5 Applications
The Convision V6xx A supports various devices that can be controlled via the serial
interface, such as weather stations or controllable sockets (not included in the scope
of delivery).
8.5.1 Activating Outputs Manually
The two outputs of the Convision V6xx A, i.e. the relay switching output and the open
collector output, are normally activated via an input alarm (refer to Chapter 9.3). The
automatic switching duration is configured in the Actions / Outputs menu.
If you want to trigger an action manually (e.g. activate a door opener), you can
activate the outputs via this menu.
)
Note: Whilst viewing the camera images, it is also possible to switch the
outputs on or off by clicking on them in the left-hand side of the window.
(see Chapter 8.1).
♦
On
Switch is closed – device is activated
♦
Off
Switch is opened – device is deactivated
♦
Trigger
Enter a time in the "Seconds" field and click "Trigger". The
switch will close for this time and then open again.
Figure 17: Configuring the outputs
If an output activated via this switch is additionally triggered by an event, it
will remain deactivated even after the set time period has elapsed.
8.5.2 Sockets
Remote controllable sockets with a serial connector supported by Convision Systems
can be controlled using a Convision V6xx A via the serial port. In this menu you can
switch the sockets on or off.
- 32 -
Convision V600 A Series
