LBC-4000 L-Band Up/Down Converter System
Revision 6
Firmware Update
5–6
MN-LBC-4000
5.2.4 Temporary Folder (Subdirectory) on the User PC
The temporary folder is where the firmware archive download is stored. There are several ways
to make a temporary folder on a Windows PC:
•
To use the Windows Desktop, see Section 5.2.4.1.
•
To use Windows Explorer, see Section 0.
•
To use the Run and Browse windows, see Section 5.2.4.3.
•
To use Windows Command-line or the Command Prompt, see Section 5.2.4.4.
1. These examples specify drive letter “c:”. You can use any valid, writable
drive letter.
2. Typical for many of the tasks that follow, type the command as instructed
and then press Enter.
After the temporary folder is created, proceed to Section 5.3 to download and extract the firmware
files.
5.2.4.1
Windows Desktop Folder Creation
Do these steps:
1. Right-click anywhere on the desktop to open the popup submenu.
2. Select
New > Folder
to make the new, temporary folder on the desktop.
3. Right-click on the new folder and then select
Rename
from the popup submenu. Rename
this folder to “temp” or some other convenient, unused name.
