LBC-4000 L-Band Up/Down Converter System
Revision 6
Ethernet Interface Operation
7–15
MN-LBC-4000
7.5.2.2
Admin | SNMP
Sect
.
7.2 SNMP Interface
The Administrator must use this page to manage the SNMP settings.
Figure 7-10. ‘Admin | SNMP’ Page
SNMP
Click
[Refresh]
to update screen.
Name
Description
Simple Network
Management
Use the drop-down list to select Enabled or Disabled.
Read Community String
Automatically populates as public.
Write Community String
Automatically populates as private.
SNMP Contact
Enter this identity information in any alphanumeric combination with a length of
0 to 20 characters.
SNMP Name
Enter this identity information in any alphanumeric combination with a length of
0 to 20 characters.
SNMP Location
Enter this identity information in any alphanumeric combination with a length of
0 to 20 characters.
Enable Authentication Trap Use the drop-down list to select Enabled or Disabled.
Trap IP 1
The Administrator can assign up to two SNMP Trap IP Addresses.
Trap IP 2
The Administrator can assign up to two SNMP Trap IP Addresses.
Trap Version
Use the drop-down list to select the version as SNMPv1 or SNMPv2.
Trap Community String
This can be any combination of characters and a length of 0 to 20 characters.
The factory default for the SNMP Trap Community String is “comtech”.
Click
[Submit SNMP]
to accept the changes.
Click
[Reset]
to revert to the previously assigned settings.
