LBC-4000 L-Band Up/Down Converter System
Revision 6
Front Panel Operation
6–9
MN-LBC-4000
6.3.3.1.2
CONFIG CnvA or CnvB
ATTEN/SLOPE
LBC-4000/-ST:
For
CnvA
:
CONFIG CnvA: Ofst=+0.0dB
Atten=00.00dB Slope=0.0
LBC-4000 only:
For
CnvB
:
CONFIG CnvB:
Atten=00.00dB Slope=0.0
Typical for either, use the
[
][
]
arrow keys to select
Atten
or
Slope
.
Set the attenuation:
Use the
[
][
]
arrow keys to select a digit to edit, and then use the
[
][
]
arrow keys to change its value.
Set the slope value:
Use the
[
][
]
arrow keys to select, in 0.1 increments, a value between
0.0 and 1.0.
For the CONFIG: Conv-A
ATTEN/SLOPE menu, the Ofst (Gain Offset)
command is available only if redundancy is enabled. See Appendix B.
REDUNDANCY OPERATION for further details on using this command in
redundancy applications.
Press
[ENT]
.
6.3.3.2
(CONFIG:) REMOTE (Remote Control) Submenu
Remote Control: Local
SERIAL ETHERNET
Use
the
[
][
]
arrow keys
to select
Local
,
SERIAL
, or
ETHERNET
. Press
[ENT]
.
