LBC-4000 L-Band Up/Down Converter System
Revision 6
Ethernet Interface Operation
7–8
MN-LBC-4000
7.4.2 HTTP Interface Features
7.4.2.1
Menu Tree
Figure 7-5 Illustrates the menu hierarchy for the HTTP Interface. It features four navigation tabs
(shown in blue). Primary page hyperlinks (grey) grant access to individual web pages.
Home
Admin
Config
Status
Home
Access
Conv A
Summary
Contact
SNMP
Conv B
Faults
Support
Ref
Utility
Redundancy
Serial
Figure 7-5. HTTP Interface Menu Tree (FW Ver. 1.2.5)
7.4.2.2
Page Navigation
The HTTP Interface has four navigation tabs at the top of each page.
Click a navigation tab to see its page hyperlinks. Click a page
hyperlink to open a page.
This manual uses a convention for all web pages to show you how to navigate to the featured
page: Navigation Tab | Page Hyperlink. For example, “Home | Home” instructs you to click the
‘Home’ navigation tab, and then select the ‘Home’ page hyperlink.
7.4.2.3
Page Sections
This manual explains the purpose and operation for each Web page
and its sections. Each page has one or more sections. The title at the
upper-left corner of each page or section describes its operational
features. Each section can have editable fields, action buttons and
read-only
displays for a specific function.
7.4.2.4
Action Buttons
Action buttons are important in the HTTP Interface. Click an action button to
do one of these tasks:
•
Click
[Refresh]
to see the latest page data (see Sect. 0).
•
[Reset] changed parameters to remove
unsaved
changes.
•
Click
[Submit]
to save changes.
If you change any parameters, make sure to click the related action button
before you leave the page. If you go to another page without first clicking the
action button, your changes are not saved.
