LBC-4000 L-Band Up/Down Converter System
Revision 6
Appendix A
A–5
MN-LBC-4000
4
Install the IDU module
into the chassis: Use
the module front handle
to push it straight in until
it is fully engaged
inside its internal
housing.
5
Tighten the captive
machine screws to
secure the module in
place.
6
Swing the front panel
back into operating
position and finger-
tighten the three
thumbscrews.
The IDU module installation is complete and the LBC-4000 L-Band Up/Down Converter System is
now ready for connection to other equipment. See
Chapter 4. REAR PANEL CONNECTIONS
for
further information.
