LBC-4000 L-Band Up/Down Converter System
Revision 6
Front Panel Operation
6–12
MN-LBC-4000
View or edit the SNMP Write Community string. Use the [
][
] arrow keys to select a character,
and then the [
][
] arrow keys to edit that character. Press [ENT].
(REMOTE:) ETHERNET
SNMP
COMMUNITIES
TRAP
Trap Community:
comtech
View or edit the SNMP Trap Community string. Use the [
][
] arrow keys to select a character,
and then the [
][
] arrow keys to edit that character. Press [ENT].
(REMOTE:) ETHERNET
SNMP
TRAPS
TRAPIP1 TRAPIP2 VERSION
Use the
[
][
]
arrow
to select
TRAPIP1
,
TRAPIP2
, or
VERSION
. Press
[ENT]
.
(REMOTE:) ETHERNET
SNMP
TRAPS
TRAPIP1/TRAPIP2
If both Trap IP Addresses are set to 000.000.000.000, it means that Traps are
disabled.
TRAP IP ADDRESS #1:
000
.
000
.
000
.
000
TRAP IP ADDRESS #2:
000
.
000
.
000
.
000
Typical for both submenus: View or edit the Trap Destination IP Address. Use the [
][
] arrow
keys to select a digit, and then the [
][
] arrow keys to change its value. Press
[ENT
].
(REMOTE:) ETHERNET
SNMP
TRAPS
VERSION
Trap Version:
SNMPv1 SNMPv2
Use the
[
][
]
arrow
keys to set the trap version as
SNMPv1
or
SNMPv2
.
Press
[ENT]
.
