LBC-4000 L-Band Up/Down Converter System
Revision 6
Rear Panel Connectors
4–1
MN-LBC-4000
Chapter 4. REAR PANEL
CONNECTORS
4.1
Overview – Cabling Connection Types
CEFD’s LBC-4000/-ST L-Band Up/Down Converter System uses a number of different cables.
Each cable type is typically dedicated to a specific mode of operation.
•
Not all of these operational interface types may be available.
•
The European EMC Directive (EN55022, EN50082-1) requires using
properly shielded cables for DATA I/O. These cables must be double-
shielded from end-to-end, ensuring a continuous ground shield.
4.1.1 Coaxial Cable Connections
(TOP) Bayonet Coupling Plug and Jack (‘BNC’ Shown)
(BOTTOM) Threaded Coupling Plug and Jack (Type ‘N’ Shown)
Figure 4-1. Coaxial Connector Examples
