LBC-4000 L-Band Up/Down Converter System
Revision 6
Preface
iv
MN-LBC-4000
European Union Electromagnetic Compatibility (EMC) Directive
(2004/108/EC)
•
EN 55022 Class A
(
Emissions)
– Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment.
•
EN 55024 (Immunity)
– Information Technology Equipment: Immunity Characteristics,
Limits, and Methods of Measurement.
•
EN 61000-3-2
– Harmonic Currents Emission
•
EN 61000-3-3
– Voltage Fluctuations and Flicker.
•
Federal Communications Commission Federal Code of Regulation FCC Part 15,
Subpart B.
TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY
THESE INSTRUCTIONS:
•
Operate the unit with its cover on at all times.
•
Use Type 'D' connectors that have back-shells with continuous metallic shielding.
•
Type ‘D’ cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back-shell.
•
Use coaxial cable that is of good quality for connections to the Switch Module Type ‘N’
female connectors.
European Union Low Voltage Directive (LVD) (2006/95/EC)
Symbol
Description
<HAR>
Type of power cord required for use in the European Community.
CAUTION:
Double-pole/Neutral Fusing
ACHTUNG:
Zweipolige bzw. Neutralleiter-Sicherung
International Symbols
Symbol
Definition
Symbol
Definition
Alternating Current
Protective Earth
Fuse
Chassis Ground
For additional symbols, refer to Warnings, Cautions and Notes listed earlier
in this Preface.
!
