InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
396
There are also other outputs availabe for GCB control:
14.2.1.6
Binary output: MCB Close/Open
Related
FW
standard v3.1.0
Description This output is intended for control of the MCB if a
contactor
is used as MCB. The
output provides continuous signal while the MCB has to be closed. See timing
diagram of all available breaker control outputs at the bottom of this description.
N
OTE
:
Use
invert
function when configuring the output in GenConfig to obtain
inverted
function
of the output, i.e. output is closed while the MCB has to be open.
There are also other outputs availabe for MCB control:
T
IMING OF BREAKER CONTROL OUTPUTS
