smart
RSD-D Quick Installation Guide
Step1. Buckle RSD-D onto the PV module frame.
A.Back buckle
B.Front buckle
Step 2. Connect the INPUT1 connectors of the RSD-D to the first PV module junction box
and connect the INPUT2 connectors to second PV module, the device DC output voltage
is within the range of 1.2 ~ 2v.
NOTE: Do not short-circuit the RSD-D output connectors, otherwise it will be damaged.
2022/05/27 Rev2.8 | Quick Installation Guide
1
Mounting brackets
OUTPUT-
INPUT2- INPUT1-
NOTE: Do not place the RSD-D (including DC connectors) where exposed to the sun, rain or snow, even gap
between modules. Allow a minimum of 3/4’’(1.5cm.) between the roof and the bottom of the RSD-D to
allow proper air flow.
