InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
135
12.2.3.27
Setpoint: SMTP password
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
3.0
Description
Use this setpoint to enter the password for the SMTP server if
12.2.3.28
Setpoint: SMTP address
Group
Comms settings
Range [units]
max. 32 characters
Related FW
3.0
Description
C
AUTION
!
Proper setting of SMTP-related setpoints as well as controller mailbox are
essential for sending
alerts via e-mails
.
This setpoint is used for entering the domain name (e.g.
smtp.yourprovider.com
) or IP address (e.g. 74.125.39.109) of the SMTP
server. Please ask your internet provider or IT manager for this information.
N
OTE
:
You may also use one of free SMTP servers, e.g.
smtp.gmail.com
. However,
please note that some free SMTP servers may cause delays (in hours..)
when sending e-mails.
N
OTE
:
If you do not want to send active e-mails, you may leave this setpoint blank,
as well as other setpoints related to SMTP server and e-mail settings.
12.2.3.29
Setpoint: Contr mailbox
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
3.0
Description
Enter an
existing e-mail address
into this setpoint. This address will be
used as
sender
address in active e-mails that will be sent from the controller.
