InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
130
Description
The setpoint selects function of the terminal address 122 at the CAN2 line.
See the latest communication guide for details about this topic.
MODEM
The address is used for modem connection via I-LB
OTHER
The address is used for direct connection to any other device
as e.g. IV8 or I-RD.
12.2.3.16
Setpoint: CANAddrSwitch2
Group
Comms settings
Range [units]
[-]
Related FW
3.0
Description
The setpoint selects function of the terminal address 125 at the CAN2 line.
See the latest communication guide for details about this topic.
MODEM
The address is used for modem connection via I-LB
OTHER
The address is used for direct connection to any other device
as e.g. IV8 or I-RD
12.2.3.17
Setpoint: CANnegotiation
Group
Comm settings
Range [units]
OFF, AUT [-]
Related FW
3.0
Description
This setpoint defines if CAN address is used in the standard way or CAN
addresses are reconfigured internally.
OFF
The control unit has the same address which is necessary for
communication. The address can be changed only from
InteliMonitor or controller screen.
AUT
Controllers can change their addresses when are interconnected
via CAN2 bus to prevent CAN bus collision. Controller address is
set up to different address if another unit with the same address
is detected on the CAN bus.
