5.0
Special Features
5.1
Memory
The Press-Mate can store up to 400 blood pressure measurements in memory. The last four measurements are
displayed on the LCD list screen. When more than four data items are stored, the
↑
mark is displayed on the
right hand side of the LCD screen.
Data is scrolled up by pressing the up arrow on the switch and scrolled down by pressing the down
arrow .
To clear the stored data, press and hold the two switches simultaneously. “MEMORY CLEAR” will
be displayed on the LCD screen and the listed data will disappear.
Printing the Memory
To print the data that is stored in memory, press the down arrow on the switch until the beep tones
stop and the following message appears:
Press the switch and the printout will begin. The LCD will now display "ALL DATA PRINTED".
To interrupt the printing at any time, press the switch again.
5.2
Clock/Elapsed Time Meter
COLIN’S clock is a smart clock. Interval cycling of blood pressure measurements is coordinated with logical
clock time. For example, during 15 minute measurement intervals that begin at 10:07, the next measurement will
be at 10:15, then 10:30, 10:45, and so on.
Note:
The smart clock feature is disabled while using the Hemodynamic Mode option.
An elapsed time meter alternates with the clock time to let you know how many minutes it has been since the
last measurement.
5-1
Note:
The listed data is stored for 10 minutes after the power is turned off.
PRESS START/STOP
SWITCH TO PRINT
MEMORY LISTING
USE LIST - ¯ TO CANCEL
LIST
LIST
LIST
LIST
LIST
LIST
LIST
S T A R T
S T O P
LIST