4.12 Loading Paper
Figure 4.6
Figure 4.4
Figure 4.7
Figure 4.5
1. Press the power switch “ON”.
2. Set the printer switch on the rear panel “ON”.
3. Push the right end of the handle to expose it (Figure 4.4).
4. Pull the paper case out all the way (Figure 4.5).
5. Insert a fresh roll of paper in the paper case. The Press-Mate uses thermal recorder paper.
Take care to insert properly; see instructions on side of unit for more details.
6. Feed an inch or so of paper through the printer rollers by pressing the Paper Feed switch (Figure 4.6).
7. Replace paper case and handle (Figure 4.7).
4-10