COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 84 / 234

Installation in 168” Radome Sea Tel 9711-56 IMA
5-30
EAR Controlled - ECCN EAR99
5.5.3.15. J14 Aux 232
Antenna M&C Serial connections. The +12 VDC output is only intended to power a very low
current consumption device, do NOT exceed
125ma MAX. Wiring is:
Pin 1 N/C
Pin 2 RD
Pin 3 TD
Pin 4 N/C
Pin 5 GND
Pin6 N/C
Pin 7 RTS
Pin 8 CTS
Pin 9 +12 VDC ( 125ma MAX )
5.5.3.16. J15 NMEA 2000
Not connected - -Future development .
5.5.4. Other BDE connections
Connect this equipment as shown in the System Block Diagram. Install the equipment in a standard
19 inch equipment rack or other suitable location. Optional slide rails are available for the Sea Tel
MXP.
5.6. BDE Final Checks
5.6.1. Visual/Electrical inspection
Perform a visual inspection of your work to assure that everything is connected properly and all
cables/wires are secured.
5.6.2. Electrical - Double check wiring connections
Double check all your connections to assure that it is safe to energize the equipment.