COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 37 / 234

Sea Tel 9711-56 IMA Installation in 144” Radome
4-13
EAR Controlled - ECCN EAR99
47. Carefully guide the cables &
isolation spring down
through the top of the Az
post as the pedestal &
reflector assembly is
lowered.
48. Hold the pedestal & reflector
assembly just above the top
of the AZ Post.
Rod End Assembly
Isolation Assembly
Left side of AZ Post
49. Rotate the isolation section
of the pedestal to align the
rod end assembly to be to
the port side (left as viewed
if you are standing AFT of
the pedestal) of the AZ Post.
50. Align the 4 mounting holes
in the lower isolation plate
to the holes in the top of the
AZ Post.
51. Lower the pedestal &
reflector assembly to be on
the top of the AZ Post,
52. Apply Loctite to and install
the 4 mounting bolts up
through the top of the AZ
Post & lower isolation plate.
53. Install 4 flat washers & hex
nuts on the bolts and tighten
to torque spec.