COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 34 / 234

Installation in 144” Radome Sea Tel 9711-56 IMA
4-10
EAR Controlled - ECCN EAR99
27. Mount the feed assembly
with the Linear drive motor
at Strut 3.
28. Apply Loctite 242 to, install
and tighten the eight
screws, lock washer & flat
washer (see red arrows)
through the front of the
scalar plate and into the end
of the drop-in feed
assembly.
29. Rotate the flexible
waveguide and harness up
over the top strut/Ku-Band
feed.
30. Attach flexible waveguide
section to the rigid
waveguide section using the
8 screws, flat washer
through the adjoined
flanges.
31. Install flat washer, lock
washer and hex nut on each
srcew and tighten all 8 hex
nuts to torque spec.
32. Install cable ties on the feed
harness to following the
cable path around the back
of the reflector to the ICU &
QOR Switch.