COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 29 / 234

Sea Tel 9711-56 IMA Installation in 144” Radome
4-5
EAR Controlled - ECCN EAR99
5. To remove the base frame
from the pallet, remove the 4
lag bolts from the FORE & AFT
legs.
6. Remove the 4 lag bolts from
the PORT & STARBOARD legs
(bolts are up through the
pallet with flat, lock & nut on
top of the foot).
7. Discard this hardware.
8. Move the base frame to the
location where you will be
assembling the ADE. Make
sure you have at least 6 feet of
clear working space all the
way around the base frame.
4.4.2. Marine Air Conditioner
If your order included a marine air conditioner:
1. If your order included a
marine air conditioner, open
its’ crate.
2. Install it onto the center of
the base pan, properly
oriented with the cutouts in
the fiberglass base pan.
3. Apply Loctite to and Install
the mounting bolts provided
with the air conditioner.
4. Tighten to torque spec.
4.4.3. Pedestal & Reflector
We recommend that you place the Pedestal & Reflector Crate in a location where you will be able to
lift these components onto the base frame.
To assemble the General Assembly (GA), the following hardware kit is provided:
67-149076-A KIT, GA ASSEMBLY, 9711 IMA
• 67-149074 KIT, INSTALL, SWITCHABLE C-BAND FEED
Qty Part Number Description