COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 82 / 234

Installation in 168” Radome Sea Tel 9711-56 IMA
5-28
EAR Controlled - ECCN EAR99
5.5.3.2. J1 Modem RX
Connect this RXIF Output to the satellite modem RX Input using an appropriate coaxial
cable.
5.5.3.3. J2 RJ - Antenna RX
Connect this RXIF Input from the antenna to this port on the rear panel of the MXP using
coaxial cable provided
5.5.3.4. J3 A/B & J4 A/B - Ethernet 4 Port 10/100 switch
Ethernet connections to computer, satellite modem LAN devices as desired.
5.5.3.5. J5 SFP Fiber Interface
SFP Gigabit Ethernet connection.
5.5.3.6. J6 Mini-USB Computer M&C Connection
Mini-USB Antenna M&C connection, if desired.
5.5.3.7. J7 USB Host
Not connected - -Future development .
5.5.3.8. J8 Console
Antenna M&C Serial connections.
5.5.3.9. J9 A/B Serial
Computer RJ-45 Serial M&C connections. A is mapped to the Radio serial M&C port of the
ICU and B is mapped to the Pass through serial M&C port of the ICU.
5.5.3.10. J10C Modem
RJ-45 Serial M&C connection to Satellite Modem Console Port.
5.5.3.11. J10D OBM
RJ-45 Serial M&C connection to Out of Band Management equipment, if used.
5.5.3.12. J11 Gyro
Terminal Strip for SBS or Synchro Gyro Compass interface connections. Wiring is:
Pin 1 Synchro R1
Pin 2 Synchro R2
Pin 3 Synchro S3 / SBS A
Pin 4 Synchro S2 / SBS B
Pin 5 Synchro S1 / SBS C
Pin 6 SBS COM