COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 138 / 234

Maintenance Sea Tel 9711-56 IMA
17-10
EAR Controlled - ECCN EAR99
13. Apply Loctite 242 to, install
and tighten the eight screws
(see red arrows) through the
front of the scalar plate and
into the end of the drop-in
feed assembly.
The LNBs and diplexer should be
horizontal.
Cross-Pol LNB (Orange Coax)
Diplexer
Co-Pol LNB (Yellow coax)
14. Connect the flexible
waveguide section from the
rotary joint on the TX port of
the feed to the top end of
the rigid waveguide.
15. Tie the harness & coaxes to
the waveguide rotary joint
with a cable tie.
16. Wrap the orange receive
coax around the feed and
connect it to the Cross-Pol
LNB (hidden behind the feed
in this view). This wrap is
required to allow the feed to
rotate through its full 270
degree (+/- 135) range of
rotation.