COBHAM Sea Tel 9711-56 IMA C Band, Installation Manual

Page: 135 / 234

Sea Tel 9711-56 IMA Maintenance
17-7
EAR Controlled - ECCN EAR99
14. Apply Loctite 242 to, install
and tighten the eight screws
(see red arrows) through the
front of the scalar plate and
into the end of the drop-in
feed assembly.
15. Route the BLUE leg of the
harness from the lower
interconnect PCB to the right
strut, up to the top strut and
over the dish (with the red
harness leg & coax).
The
BLUE leg of the harness attaches
to the lower interconnect PCB.
The
RED leg of the harness attaches
to the upper interconnect PCB.
16. On the back side of the
reflector:
•
If your antenna is a standard
9711 system, connect the
harness to the “Feed” DB25
port on the PCU.
•
If your antenna is a 9711QOR
system, connect the harness
to the “Reflector A” DB25
port on the QOR Switch Box.