O P E R A T I N G M A N U A L
8 0 0 . 7 4 9 . 2 7 6 1
w w w . c o a c h c o m m . c o m
5 8
Adding a Profile
Use the procedures below to add a profile to your X-System configuration. For information on assigning profiles, see
““Assigning New Profiles” on page 52 and ““Assign Profiles from the Control Unit” on page 68.
1. Open X-Ware and access the Advanced Settings window.
Note:
You can add a profile to a “live” system or to an “offline” system. If you make the change while
offline, you’ll have to first open a saved .ccf file to edit.
2. Click the
Profile Management
Tab. This tab displays a list of the profiles in the open system configuration file.
3. Click the
Add Profile
button in the bottom left corner of the screen. A new profile will appear
in the list.
4. Double-click on the newly created profile. The profile’s detail screen will display.
Figure 77: X-Ware Profile Management Tab
Figure 78: Add Profile Button
Figure 79: X-Ware Profile Detail Screen
