O P E R A T I N G M A N U A L
8 0 0 . 7 4 9 . 2 7 6 1
w w w . c o a c h c o m m . c o m
3 3
Control Unit LCD
Home Operating Screen
Serves as the primary operating screen and displays the status of the Control Unit’s connected Radio Packs.
Note:
The Link Quality Indicator (LQ) provides a diagnostic measurement of actual packet transmission from
Radio Pack to RT and vice versa. The LQ value on the Control Unit LCD represents the lowest LQ value
of the two possibilities. To discover more about which value is displaying on your device, you would
need to consult the individual Radio Pack or X-Ware. (See Understanding Link Quality
on page 70 of
this manual for more information.)
Secondary Operating Screen
Displays additional information about the status of the Control Unit’s connected Radio Packs. Short press the Home button
once to toggle between the Primary and Secondary screens. After 60 seconds, the screen will timeout and revert back to
the Home screen.
Note
:
Radio Signal Strength Value displays the actual value of the radio signal in dBm.
Talk Button is Active
No RP Logged In
Active RP
Link Quality
Radio Signal
Strength Indicator
Battery Level
Frequency
Pack Name
Profile Name
Figure 40: Control Unit Primary Operating Screen
Figure 41: Control Unit Secondary Operating Screen
Talk Button is Active
No RP Logged In
Active RP
Link Quality
Radio Signal
Strength Indicator
Remaining Battery
Time
Radio Signal
Strength Value
Pack Name
RT Name
