Club Car FE 350, Maintenance And Service Supplement

Page: 123 / 280

ELECTRICAL COMPONENTS Reverse Warning Buzzer
12
REAR REVERSE WARNING BUZZER REMOVAL
For Turf 6, Carryall 6, Villager, and TransPorter vehicles:
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline Vehicles, Section 10,
Page 10-2.
2. Remove the bed or seat. See Key Switch Removal on page 12-14.
3. Disconnect the wires from the reverse warning buzzer. Do not allow wires to touch (Figure 12-23, Page 12-22) .
4. Remove the mounting screws (10) securing the buzzer (9) to the left rear fender.
REAR REVERSE WARNING BUZZER INSTALLATION
For Turf 6, Carryall 6, Villager, and TransPorter vehicles:
1. Install the screws (10) through the buzzer bracket tabs and tighten to a torque of 3.5 in-lb (0.40 N·m) (Figure
12-23, Page 12-22) .
2. Connect black wire (11) from frame ground to the negative (–) terminal on the buzzer.
3. Connect the red/white wire from the wire harness to the positive (+) terminal on the buzzer.
4. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles, Section 10, Page
10-3.
5. Install the bed or seat. See Section 5 – Body and Trim in the appropriate maintenance and service manual.
2009 FE 350 Maintenance and Service Supplement Page 12-23