Club Car FE 350, Maintenance And Service Supplement

Page: 115 / 280

ELECTRICAL COMPONENTS Key Switch
12
1
2
3
516
Figure 12-17 Center Dash Panel Removal
3. Disconnect the wires from the key switch.
4. Remove the key switch:
4.1. Remove the key switch cap with a small, flat-blade screwdriver.
4.2. Remove key switch (2) from the dash by holding the key switch and turning the nut (1) on the outside of the
dash with a 1-inch socket wrench (Figure 12-18, Page 12-15) . Remove the keyed washer with key switch.
1
2
502
Figure 12-18 Key Switch Removal
KEY SWITCH INSTALLATION
1. Reverse removal procedures to install key switch in the dash. Connect wires to key switch. See Wiring Diagrams
on page 11-6. Coat the connectors with Battery Terminal Protector Spray (CCI P/N 1014305) to prevent corrosion.
Be sure that key switch terminals cannot touch the frame and that panel is properly seated and snapped in place.
2. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles, Section 10, Page
10-3.
2009 FE 350 Maintenance and Service Supplement Page 12-15