Club Car FE 350, Maintenance And Service Supplement

Page: 256 / 280

18
Forward/Reverse Shifter Cable UNITIZED TRANSAXLE
FORWARD/REVERSE SHIFTER CABLE ADJUSTMENT
With the shifter lever of the unitized transaxle in the NEUTRAL position (Figure 18-54, Page 18-22) , the
Forward/Reverse handle (9) (Figure 18-53, Page 18-21) should align with the N position on the dash. For minor
adjustments, the nut (10) may be loosened and the ball joint socket (4) rotated to get the proper adjustment (Figure
18-53, Page 18-21) . See following CAUTION.
CAUTION
• Be sure threads of cable are engaged in ball joint socket at least 1/4 inch (6.35 mm). If ball joint socket
comes loose from the cable, the Forward/Reverse shifter will not operate properly.
F
N
R
592
Figure 18-54 Forward/Reverse Shifter Positions
For major adjustments, the cable jacket retaining nuts (6) must be loosened and adjusted. When the cable is
properly adjusted, with the Forward/Reverse handle (9)
(Figure 18-53, Page 18-21) in the NEUTRAL position, the
shifter arm of the transaxle will also be in the NEUTRAL position (Figure 18-54, Page 18-22) . Tighten nuts at the
transaxle to 22 ft-lb (29.8 N·m).
Page 18-22 2009 FE 350 Maintenance and Service Supplement