S10 FE350 FUEL SYSTEM
Choke and Air Intake System
15
3.3. Secure the bottom of the air duct shield to the floorboard with a rivet (31).
3.4. Remove the backing from the tape and secure top of air duct shield to frame.
4.
Install air box.
See Air Box Installation on page 15-13.
5.
Install steering joint assembly.
See following NOTE.
NOTE:
Make sure steering wheel and front wheels are properly aligned before installing steering joint.
5.1. Position steering joint assembly (1) on vehicle as shown. Install three lock washers and three bolts and
tighten to 15 ft-lb (20.3 N·m)
5.2. Align the flat portion of the steering shaft spline with the bolt hole in the universal joint and then slide
the shaft into the upper universal joint. Install the bolt and lock washer on the upper universal joint and
tighten to 15 ft-lb (20 N·m).
6.
Install front left wheel. Tighten the wheel rim mounting nuts to 55 ft-lb (75 N·m).
7.
Install front body.
8.
Check for proper operation.
2009 FE 350 Maintenance and Service Supplement
Page 15-15
