Club Car FE 350, Maintenance And Service Supplement

Page: 122 / 280

12
Reverse Warning Buzzer ELECTRICAL COMPONENTS
FRONT REVERSE WARNING BUZZER INSTALLATION
1. Install the screws (3) through the buzzer bracket tabs and tighten to 3.5 in-lb (0.40 N·m) (Figure 12-22, Page
12-22) .
2. Connect the black wire from the key switch to the negative (–) terminal on the buzzer.
3. Connect the red/white wire from the wire harness to the positive (+) terminal on the buzzer.
4. Reverse removal procedures to install the center dash in the vehicle. Be sure that the key switch terminals cannot
touch the frame and that the panel is properly seated and snapped in place.
5. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles, Section 10, Page
10-3.
1
M-
2
M+
3
2
As seen from front driver side of vehicle with body removed.
9
12
13
14
15
11
10
520
Figure 12-22 Front Reverse Warning Buzzer
1423
Figure 12-23 Rear Reverse Warning Buzzer
Page 12-22 2009 FE 350 Maintenance and Service Supplement