C0240111-04-05-GB
Calibration
m
p
Access mask to calibration submenu. Press "Up" or "Down" to scroll the other
masks and "Esc" to return to the submenu.
High pressure
transducers
Start Scale 00.0bar
End Scale 30.0bar
Mask for configuring the high pressure transducers.
252
253
Low pressure
transducers
Start Scale 00.0bar
End Scale 16.0bar
Mask for configuring the low pressure transducers.
254
255
Master calibration
offset Value
B1: 0.0bar 07.3bar
B2: 0.0°C 12.3°C
Modifies the probe offsets. (Only present if required by the type of machine
configured).
The word "master" only appears on units with more than 2 circuits.
256
257
Master calibration
offset Value
B3: 0.0°C 12.3°C
B4: 0.0°C 12.3°C
Modifies the probe offsets. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
258
259
Master calibration
offset Value
B5: 0.0°C 12.3°C
B6: 0.0°C 07.3bar
Modifies the probe offsets. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
260
261
Master calibration
offset Value
B7: 0.0°C 05.3°C
B8: - -
Modifies the probe offsets. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
262
263
Master calibration
offset Value
B9: 0.0°C 00.0°C
B10: - -
Modifies the probe offsets. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
264
265
Master calibr. exp1
offset Value
B1: 0.0°C 35.6°C
B2: 0.0°C 40.5°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
266
267
Master calibr. exp1
offset Value
B3: 0.0°C 37.2°C
B4: 0.0°C 37.2°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
268
269
Master calibr. exp2
offset Value
B1: 0.0bar 04.2bar
B2: 0.0bar 03.9bar
Modifies the probe offsets of expansion 2. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
270
271
Master calibr. exp2
offset Value
B3: 0.0°C 35.6°C
B4: 0.0°C 40.5°C
Modifies the probe offsets of expansion 2. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
272
273
Master calibr. exp2
offset Value
B5: 0.0°C 22.3°C
B6: 0.0°C 24.2°C
Modifies the probe offsets of expansion 2. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
274
275
Master calibr. exp2
offset Value
B7: 0.0°C 22.4°C
B8: - -
Modifies the probe offsets of expansion 2. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
276
277
Master calibr. exp3
offset Value
B1: 0.0°C 05.3°C
B2: 0.0°C 00.0°C
Modifies the probe offsets of expansion 3. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
278
279
Master calibr. exp3
offset Value
B3: 0.0°C 00.0°C
B4: 0.0°C 00.0°C
Modifies the probe offsets of expansion 3. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
280
281
Master calibr. exp5
offset Value
B1: 0.0°C 00.0°C
B2: 0.0°C 00.0°C
Modifies the probe offsets of expansion 5. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
282
283
Master calibr. exp5
offset Value
B3: 0.0°C 00.0°C
B4: 0.0°C 00.0°C
Modifies the probe offsets of expansion 5. (Only present if required by the type of
machine configured)
The word "master" only appears on units with more than 2 circuits.
284
285
Slave calibration
offset Value
B1: 0.0bar 07.3bar
B2: 0.0°C 12.3°C
Modifies the probe offsets. (Only present if required by the type of machine
configured).
286
287
51