C0240111-04-05-GB
7
1
1
1
0
0
0
8
0
0
0
1
0
0
9
1
0
0
1
0
0
10
0
1
0
1
0
0
11
1
1
0
1
0
0
12
0
0
1
1
0
0
13
1
0
1
1
0
0
14
0
1
1
1
0
0
15
1
1
1
1
0
0
16
0
0
0
0
1
0
17
1
0
0
0
1
0
18
0
1
0
0
1
0
19
1
1
0
0
1
0
20
0
0
1
0
1
0
21
1
0
1
0
1
0
22
0
1
1
0
1
0
23
1
1
1
0
1
0
24
0
0
0
1
1
0
25
1
0
0
1
1
0
26
0
1
0
1
1
0
27
1
1
0
1
1
0
28
0
0
1
1
1
0
29
1
0
1
1
1
0
30
0
1
1
1
1
0
31
1
1
1
1
1
0
32
0
0
0
0
0
1
3.4.4 CONFIGURING THE PLAN NETWORK
x
CONFIGURING THE PLAN NETWORK (local):
For each unit with an on-board keyboard, perform the following procedure to create a “locale” plan
network:
1)
Press [UP], [DOWN] and [ENTER] together and hold down until
the mask shown to the side appears.
Display address
Setting..........:00
I/O Card address:
2)
Set the required address for the keyboard (e.g.: 21 )
Display address
Setting..........:21
I/O Card address:--
3)
Press [ENTER] to display the address of the cards in pLan (in
this case 1 ).
N.B.: If there is more than one card, press [UP] or [DOWN] to
choose which card to configure.
Display address
Setting..........:21
I/O Card address:01
4)
Press [ENTER] to configure the terminals; press [ENTER] to
confirm
Terminal config
Press ENTER
To continue
5)
In this mask, the [ENTER] key moves the cursor from one field
to another and the [UP] or [DOWN] keys change the values.
P:01 means that the card with address 1 is being configured.
P:01 Adr Priv/Shared
Trm1 None --
Trm2 None --
Trm3 None -- Ok?No
16