C0240111-04-05-GB
643
Probe 3 error expansion 4 slave
“analogue, as above”
A
644
Probe 4 error expansion 4 slave
“analogue, as above”
A
651
Probe 1 error expansion 5 slave
“analogue, as above”
A
652
Probe 2 error expansion 5 slave
“analogue, as above”
A
653
Probe 3 error expansion 5 slave
“analogue, as above”
A
654
Probe 4 error expansion 5 slave
“analogue, as above”
A
Key to “RESET” column:
M
= Manual reset alarm (if the condition that generated the alarm is eliminated, the alarm must be
reset by hand)
A
= Automatic reset alarm (if the condition that generated the alarm is eliminated, the alarm is reset
automatically)
A/M
= Automatic reset alarm for the first three cut-ins, after which manual
S
= Signal on display (but does not set the “cumulative alarms” which stops the machine)
S-A
= Automatic reset signal (that does not stop the machine) or alarm. The mode is selected from a
parameter
M - A/M = Manual reset alarm (in hermetic, alternative and screw compressors),
automatic for the first three cut-ins, after which manual (in centrifuge compressors)
42