manualshive.com logo in svg

Claas DOMINATOR 130, Operator'S Manual

The Claas DOMINATOR 130 Operator's Manual is essential for effectively utilizing this powerful agricultural machine. Easily download the manual for free from our website, providing you with all the necessary information to operate and maintain your equipment efficiently. Get your copy now and optimize your farming operations.

Share
Download
background image

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 

7

 
 

67075

4.1.17 Attachment parts / machine body dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
4.1.18 Attachment parts / machine body weights  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

5 Prior to initial operation

5.1 General Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

5.1.1

General warnings Prior to initial operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

5.1.2

Initial operation check list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

5.2 Chassis   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

5.2.1

Removing / installing the wheels   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

5.2.2

Overview of rear axle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

5.2.3

Converting the rear axle from transport to working position . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

5.2.4

Rear axle 00 0649 950 1 – Adjusting the track width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

5.3 Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

5.3.1

Installing the trailer hitch (accessories)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

5.4 Electrical / electronic equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

5.4.1

Installing the fan / air conditioner fuse   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

5.5 Feeder unit   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

5.5.1

Fitting / adjusting the mounting plates  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

5.5.2

Aligning the coupling pin   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

5.5.3

Checking the front attachment cylinders   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

5.5.4

Checking the cutterbar float springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

5.6 Grain delivery  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

5.6.1

Closing the service aperture on the grain tank unloading tube   . . . . . . . . . . . . . . . . . . . . . . . . 99

5.6.2

Installing the grain tank safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

6 Prior to each operation

6.1 General Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

6.1.1

General warnings Prior to operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

6.1.2

Check list for daily operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

7 Overview of controls

7.1 General Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

7.1.1

General warnings - Overview of controls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

7.2 Cab / Operator's platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

7.2.1

Overview of operator's platform (DOMINATOR 130)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

7.2.2

Overview of operator's platform (DOMINATOR 150/140) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

7.2.3

Hydraulic system control unit (DOMINATOR 130 lift hydraulic system)  . . . . . . . . . . . . . . . . . 107

7.2.4

Multifunction handle (DOMINATOR 150 / 140)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

7.2.5

Switch console (DOMINATOR 130)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

7.2.6

Diesel engine speed adjustment rotary switch (DOMINATOR 130, 
CATERPILLAR C-6.6, 3056 E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

7.2.7

Diesel engine speed lever (DOMINATOR 130, Perkins 1006-T6)  . . . . . . . . . . . . . . . . . . . . . 109

7.2.8

Function of warning lights 7 and 8 (DOMINATOR 130)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

7.2.9

Switch console (DOMINATOR 150 / 140)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  111

7.2.10 Diesel engine speed rotary switch (DOMINATOR 150 / 140) . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.2.11 Function of warning lights 15 and 18 (DOMINATOR 150 / 140) . . . . . . . . . . . . . . . . . . . . . . . 113
7.2.12 Overview of steering column   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
7.2.13 Cab roof controls   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
7.2.14 Cab with fan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Summary of Contents for DOMINATOR 130







































































































































































































































































































































































































Reviews:

No comments

Related manuals for DOMINATOR 130

ParaBody 855 User Manual preview
855
Brand: ParaBody Pages: 5
Sagola 6110 Instruction Manual / Spare Parts List preview
6110
Brand: Sagola Pages: 20
Earmor C51 Quick Start Manual preview
C51
Brand: Earmor Pages: 5
Dawn 1500 Assembly And Operation Manual preview
1500
Brand: Dawn Pages: 8
BACtrack VIO User Manual preview
VIO
Brand: BACtrack Pages: 13
Badgematic FLEXI Manual preview
FLEXI
Brand: Badgematic Pages: 28
BACtrack Select S80 Product Specifications preview
Select S80
Brand: BACtrack Pages: 2
MADRIX STELLA Quick Start Manual & Technical Manual preview
STELLA
Brand: MADRIX Pages: 28
BACTcontrol microLAN Software Manual preview
microLAN
Brand: BACTcontrol Pages: 28
Backyard Products 4030 Assembly Instructions Manual preview
4030
Brand: Backyard Products Pages: 98
HANYOUNG NUX RLA-KB Series Quick Start Manual preview
RLA-KB Series
Brand: HANYOUNG NUX Pages: 2
Idmed ToFscan Quick Start preview
ToFscan
Brand: Idmed Pages: 2
B. Braun Perfusor Space Instructions For Use Manual preview
Perfusor Space
Brand: B. Braun Pages: 40
B. Braun Perfusor Space Cleaning And Disinfection Manual preview
Perfusor Space
Brand: B. Braun Pages: 4
mychway MS-7206F User Manual preview
MS-7206F
Brand: mychway Pages: 56
Sabo 45-220 Operator'S Manual preview
45-220
Brand: Sabo Pages: 76
Gardner Denver WELCH LVS 600 T Operation Manual preview
WELCH LVS 600 T
Brand: Gardner Denver Pages: 68
Parkside PFMR 1400 B1 Operation And Safety Notes preview
PFMR 1400 B1
Brand: Parkside Pages: 37

Brands by name

Popular brands

Load more brands