00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
189
10 Fieldwork settings
10.6 Crop receptacle / straw receptacle
67086
83338
10.6.5 Straw chopper sieves installation
position
The straw chopper can be shifted to the rear as far as
possible. In this installation position, the sieves can be
mounted.
– Observe the general warnings at the beginning of
the "Fieldwork settings" chapter.
– Move the straw chopper from the front
position (putting the straw chopper out of opera-
tion) to the rear.
– Unscrew turn locks (12) on both sides.
– Unscrew the turn lock (13).
– Unscrew guard (19) and remove belt.
– Unhinge connecting rod at position (A).
– Disconnect speed monitoring cable at
position (B).
– Fold up panel (20) and support it.
Danger!
The cutting cylinders of the straw chopper can
run on even if the drive is switched off.
Death or serious injuries!
– Never touch any machine parts that con-
tinue running.
– Wait until all machine parts have com-
pletely stopped moving.
35
28748
12
13
12
19
36
28800
A
20
B
