228
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
11 Fieldwork
11.9 Crop receptacle / straw receptacle
67087
– Close the right side cover.
Switching off the straw chopper function monitor
DOMINATOR 130 (optional equipment)
The straw chopper speed monitor must be switched off
when putting the straw chopper out of operation
(swinging the standard spreader to swathing position),
using the pull switch (1).
When the chopper is standing still while the pull switch
is OFF, the horn on the operator's platform produces
no horn sound. The straw chopper indicator light in the
vehicle information unit is also deactivated.
Straw chopper function monitor
DOMINATOR 150 / 140 (optional equipment)
The straw chopper speed monitor is switched off auto-
matically when putting the straw chopper out of
operation (swinging the standard spreader to swathing
position).
83211
11.9.3 Swinging the standard distributor into
the transport trolley transport position
– Observe the general warnings at the beginning of
the "Fieldwork" chapter.
– Slacken off toggles (7) on both sides.
– Lift the sheet metal plate (8) on the left side.
Swing the standard distributor (9) all the way up
until the sheet metal plates on both sides snap
into the notches (A).
– Bolt down toggles (7) on both sides.
The transport trolley can now be hitched.
68
19554
1
Danger!
The cutting cylinders of the straw chopper can
run on even if the drive is switched off.
Death or serious injuries!
– Never touch any machine parts that con-
tinue running.
– Wait until all machine parts have com-
pletely stopped moving.
69
19696
7
9
8
A
