190
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
10 Fieldwork settings
10.6 Crop receptacle / straw receptacle
67086
– Move the straw chopper to the rear as far as pos-
sible, using crank (14).
– Bolt down turn lock (12), thus securing the straw
chopper against sliding to the front.
The sieves can now be installed.
When installation of sieves is complete, the straw
chopper must be moved back to its initial position at
the front (putting the straw chopper out of operation).
– Move the straw chopper fully to the front, using
the crank.
– Use lever (17) for lifting support (16) over the
keeper (18).
– Unlock panel (20) and fold it down.
– Connect speed monitoring cable at position (B).
– Fit connecting rod at position (A).
– Install belt (5) and bolt down guard (19).
– Bolt down turn locks (12) on both sides.
– Tighten the turn lock (13).
– Check belt (5). The belt (5) must make contact
with all pulleys, jockey pulleys and guide rollers.
Provide contact of belt if required.
– Close the right side cover.
37
28801
14
12
Danger!
Pinch point from moving machine parts.
Serious injuries.
– Secure machine parts.
– Comply with instructions.
38
28800
39
28710
A
20
B
18
16
17
40
28748
12
13
12
19
5
