Configuring the Cisco VC 220 Network Camera Software
Applications > Events
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
70
6
-
File Name Prefix—
Enter the text to be added in front of the file name.
-
Add date and time suffix to file name
—Select this option to add a date
and time after the file name.
•
Video Clip—
Sends video clips when a trigger is activated.
-
Source
—Select to record video clips from stream 1 or stream 2.
-
Pre-event Recording
—Specify to record video clips for a number of
seconds before a trigger is activated. Up to nine seconds can be set.
-
Maximum duration
— Specify to record video clips for a number of
seconds before a trigger is activated. Choices are from 1 to 10 seconds;
the default is
5
seconds.
-
Maximum file size
—Specify the maximum file size. Range is from 50 to
800 kb. The default is
500
kb.
-
File Name Prefix—
Enter the text to be added in front of the video clip
name.
•
System Log—
Select to send a system log when a trigger is activated.
•
Instant Message—
Sends an IM message when a trigger is activated.
-
Message—
Enter the message to be sent when a trigger is activated.
When completed, click
OK
to take effect. The new media name appears in the
media drop-down list on the
Application > Events
page. To remove a media
setting from the list, select a media name from the drop-down list and then click
Delete
. If a media setting is currently applied to an event setting it can’t be edited
or deleted.
Configuring Event Settings
Click Add to open up a window where you name an event, and configure the
details that trigger the event, when to act upon it, and what action to take.
Event
•
Event name
—The unique name for a recorded event. The maximum length
is 40 characters, and the following characters are not allowed: spaces, <, >,
&, `, ’, or ”.
•
Enable this event
—Check to enable recording of this event.
