Configuring the Cisco VC 220 Network Camera Software
Camera Control > I/O Ports
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
62
6
Camera Control > I/O Ports
Use the
I/O ports
page to set the input and output port functions. It is
recommended that you connect your input and output devices before configuring
them. When you complete the configuration, click
Save
to save the settings;
otherwise click
Cancel
to discard the changes.
Input Ports
•
Triggered When
—Select
High
or
Low
to define the normal status of the
digital input. The Cisco VC 220 network camera shows whether the trigger
is activated or not. The default is
High
.
Output ports State at Power On
•
Default State
—Select
Grounded
or
Open
to define the normal status of
the digital output. The Cisco VC 220 network camera shows whether the
trigger is activated or not. The default is
Open
.
TIP
For connection diagrams see
General Purpose Input and Output Terminal Block,
page 16
. For configuration steps, see
Configuring the GPIO Ports, page 96
.
