Using the Web-Based Configuration Utility
Getting Started
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
36
5
you choose HTTP. If you are inside a firewall, use this protocol to allow the
streaming data to come through.
STEP 4
Configure the MPEG-4 saving options:
•
Folder—Specify where to store the recorded video files.
c:\Record
is the
default path.
•
File Name Prefix—Specify the text that precedes the video file name.
CLIP
is the default.
•
Add date and time suffix to the file name—Check this to add the date and
time to the file name suffix. The format is YYYYMMDD_HHMMSS.
For example, in the following filename:
CLIP_200801008_180853
The filename prefix is
CLIP_
and the date and time suffix is
200801008_180853
.
STEP 5
Click
Save
to save your settings.
Getting Started
Click
Setup
in the toolbar to access the
Getting Started
page. The
Getting
Started
page provides you quick links to some of the most used features.
Initial Setup
•
Change Default Admin Password and Add Users
—It is recommended
that you change the password of the camera after you first set up the
camera. See
Administration > Users, page 75
for instructions on changing
your password. See also
Administration > Password Strength, page 78
for information on minimum password security settings.
•
Configure Device IP Settings—
See
Network Setting > IP Setting,
page 41
for instructions on changing your IP settings.
•
Change Streaming Video Settings—
See
Camera Control > Video
Settings, page 57
for instructions on changing your video streaming and
image settings.
