Configuring the Cisco VC 220 Network Camera Software
Network Setting > DHCP Auto Configuration
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
56
6
Network Setting > DHCP Auto Configuration
DHCP Auto Configuration supports mass camera deployments so that camera
configuration files can be downloaded using DHCP option 66 and 67. To use DHCP
Auto Configuration, you must select DHCP as your IP Setting, which allows the
camera to retrieve configuration files from the DHCP server in the network. You
cannot use this feature if you are using a static IP address.
When you complete the configuration, click
Save
to save the settings; otherwise
click
Cancel
to discard the changes.
•
Enable Automatic Configuration Download From TFTP Server (Option
66/150 and 67
)—When enabled, the camera as a DHCP client tries to
obtain the TFTP server and configuration file specified by the DHCP router
in the network. If the DHCP router does not provide the TFTP server and
configuration file location, the Cisco VC 220 camera looks for the
Backup
TFTP Server
and the
Backup Configuration File
.
•
Backup TFTP Server
—The camera attempts to retrieve the configuration
file from a backup server if the TFTP server assigned by the DHCP server
has failed.
•
Backup configuration file
—Specify the file name of configuration file on
the backup TFTP server.
