Configuring the Cisco VC 220 Network Camera Software
Network Setting > TCP/UDP Port Settings
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
45
6
http://<host_name>.local/video.mjpg
The following example sets the access name for Stream 1 to video.mjpg:
STEP 1
Launch Mozilla Firefox.
STEP 2
Set the video mode to MJPEG.
STEP 3
Type the URL command in the address field. Press Enter.
The JPEG images are displayed in your web browser.
•
FTP Port
—Enter the port number used for the FTP server. The default port
is
21
.
•
HTTPS Port
—Assign an HTTPS port in the text box. The default HTTPS
port is
443
.
•
Two-Way Audio Port
—Enter the port number used for audio. The default
port is
5060
.
•
Authentication
—Used for RTP/RTSP. Select from three authentication
options: Disabled, Basic, and Digest.
-
Disabled
—Allows an RTP/RTSP session without a username or
password.
-
Basic
—Allows the username and password to be sent over the network
in clear text.
-
Digest
—An agreed-upon method that a web page can use to negotiate
credentials with a web user using the HTTP protocol. The Digest
authentication method is an application of MD5 cryptography.
•
Access Name for Stream 1
—Specifies the access name for Stream 1. This
name is the access URL for accessing the camera from client software (for
example, QuickTime Player) when the codec type is MPEG-4.
•
Access Name for Stream 2
—Specifies the access name for Stream 2. This
name is the access URL for accessing the camera from client software (for
example, QuickTime Player) when the codec type is MPEG-4.
NOTE
Stream 1 and Stream 2 can use the same codec, but can use different
resolutions, bitrates, or frame rates.
•
RTSP port
—Configure your router to forward traffic to this port on your
computer. The default RTSP port is
554
.
