Configuring the Cisco VC 220 Network Camera Software
Applications > Events
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
69
6
values allow for easier motion detection. Set your percentage to low and
the chances are greater that motion will be detected.
Applications > Events
An event can be triggered by many sources, such as motion detection or external
digital input devices. When an event is triggered, you can specify what kind of
action will be performed. For example, you can configure the Cisco VC 220
network camera to send buffered images to an FTP server and to send email
notifications when motion is detected.
A maximum of three events can be configured.
NOTE
Configure motion detection events in the following order:
1. Set up your servers to specify event delivery; see
Applications > Servers,
page 63
.
2. Configure your media; see
Configuring Media Settings, page 69
.
3. Configure your event settings, such as triggers; see
Configuring Event
Settings, page 70
.
Configuring Media Settings
Media
•
Media Name
—Enter a descriptive name for the media setting.
Media Type
•
Snapshot
—Sends snapshots when a trigger is activated.
-
Source
—Choices are
Stream 1
or
Stream 2
.
-
Send # pre-event images (0-7)—
Specify how many images to capture
before a trigger is activated. Up to seven images can be captured. The
default is
1
image.
-
Send # post-event images (0-7)
—Specify how many images to
capture after a trigger is activated. Up to seven images can be captured.
For example, if both the
Send pre-event images
and
Send post-event
images
are set to seven, a total of 15 images are captured after a trigger
is activated. The default is
1
image.
