Configuring the Cisco VC 220 Network Camera Software
Camera Control > Audio Settings
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
60
6
Camera Control > Audio Settings
Use the
Camera Control > Audio Settings
page to configure audio settings. When
you complete the configuration, or click
Save
to save the settings; otherwise click
Cancel
to discard the changes.
Audio Settings
•
Disable Audio
—Select this option to mute audio transmission from the
Cisco VC 220 network camera to all clients. If this option is selected, no
audio is transmitted to clients even if audio transmission is enabled in the
Client Settings
page.
Audio is disabled by default to save bandwidth.
•
Audio Options
—Select
Listen Only
,
Talk Only
,
or
Two-Way Audio
.
Two-
Way Audio
is the default.
-
In
Listen Only
mode, your computer speakers are enabled and your
camera’s microphone is enabled. When you enable
Listen Only
, an icon
is displayed on the
View Video
page and audio is picked up through the
camera. You can then use the icon to turn audio on and off.
-
In
Talk Only
mode, the camera’s external speakers are enabled. When
you enable
Talk Only,
an icon is displayed on the
View Video
page and
audio from your computer is played through your camera’s speakers.
You can then use the icon to turn the camera’s external speakers on and
off.
-
In
Two-Way Audio
mode, both the
Listen Only
and
Talk Only
icons
appear on the
View Video
page. You can use the talk and listen modes
simultaneously.
•
Internal Microphone Gain
—Select the gain of the internal audio input
according to ambient conditions. Adjust the gain in 33 steps from
+21 db
(most sensitive) to
-33 db
(least sensitive). The default gain is
0
.
•
External Microphone Gain
—Select the gain of the external microphone
input. Adjust the gain in 33 steps from
+21 db
(most sensitive) to
-33 db
(least sensitive). The default gain is
0
.
•
Audio type
—Select an audio codec. Choices are
AAC
or
GSM-AMR
. The
default is
AAC
.
